People that use our products.

225+ Electricians, Engineers and Energy professionals
trust and use our products.

DA01 – Output integrator – 1A

SKU: EM MT IT DA Category: Tags: , , ,

84.00 $

Use Rogowski Coils as normal Current transformers with this Integrator. It amplifies the signal from the Rogowski coil to be the same as a 1 A current transformer (CT). The DA01 is a DIN-RAIL mounted, 1A Output Rogowski coil integrator. It is powered directly from the mains power supply. The DA01 can be combined with any model and size of MRC and NRC Range Rogowski coils. The DA01 and Rogowski coil is a very flexible system, suitable for high power load analysis, impulsive current monitoring, DC ripple measurement, etc. Flexible Rogowski coils are a good solution for current measurement and can be used in a number of cases where traditional current transformers is not the adequate solution.

Weight N/A
Dimensions N/A
Size

1A, 5A

Back in Stock Notification.

Would you like to be notified when this item is back in stock? Then please complete the form below:

GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • PayPal
  • Klarna

We love our products and are confident you will love them too! In case things don’t go as planned, our return policy is designed to be as easy as possible for you: We offer a risk-free 30-day money-back guarantee on all purchases.

  • Free shipping on orders over €150 in EU
  • Satisfied or your money back: 30 days test
  • Two year warranty
  • Supplier in Germany

Features of the DA01:

DA01 is a DIN-RAIL 1A Output Rogowski coil integrator. It is installed in a distribution box, in a plastic 1 module DIN-RAIL enclosure, and powered directly from the mains.

The DA01 can be combined with any model and size of Y-FCT or FCT Rogowski coils. The available values are: 0-1A AC.

DA01 and Rogowski coil is a very flexible system, suitable for high power load analysis, impulsive current monitoring, DC ripple measurement, etc.

Due to its specific features, the flexible Rogowski coil is an excellent solution for current measurement and can be used in a number of cases where the traditional current transducer is not an adequate solution.

What does the DA01 integrator do?

Rogowski coil output is a weak voltage mV signal, the DA01 can amplify and convert it to a standard signal which can be captured by multimeter and scope.

Rogowski coil output is proportional to the frequency of the measured current, the signal equalization ensures a linear response on a wide frequency range.

DA01 allows the use of coils on different electrical network frequencies, keeping the same output level over the frequencies.

An integrator is essential to equalize and shift the output signal from the Rogowski coils by 90°.

It consists of an active electronic circuit with negligible offset and a good linearity.

Advantages:

  • High read accuracy 0.5%
  • Compact DIN-RAIL construction
  • High bandwidth for measurement 30 to 5kHz
  • Output 1A rms

Applications:

  • Measuring devices, lab instrumentation
  • Power monitoring & analysis
  • Harmonics and transients monitoring
  • Welding machine control
  • High current measurement

Specifications of DA01 integrator:

ModelDA01
Rated output1A AC rms
Maximum Output(overload)1.5A AC rms
Rated ratio100A
600A
1000A
3000A
6000A
Read Accuracy0.5% typical at 1%(≥10A) to 110%of rated Current @25℃
Phase error≤0.5°
Linearity±0.2% of reading(10% to 120% of range)
Bandwidth30Hz to 5kHz
Maximum Burden0.5Ω
MeasurementSecondary CTs to measure output of integrator
Power consumption5W
Output on 0A            (zero drift)≤0.01A
Temperature drift200ppm/℃
Weight320g
Dimension114*100*22.5mm
Power supply 12V DC
Operating temperature-20℃ to 70℃
Storage temperature-30℃ to 90℃
Relative humidity80% max.without condensation
Protection degreeIP20

Technical support

If you have any difficulty with the meter setup, installation, data analysis, or anything else, we will gladly support you.

Please contact our technical support department for technical support on WhatsApp at +27 82 940 1858, or by email: info at AmpX.co 

technical support

Warranty

These energy loggers has been field tested to be reliable and with a very low failure rate. If in the rare case something does go wrong, we will swop it out if still under guarantee. This energy logger has a two-year swop-out guarantee. As an authorised Meatrol repair centre, we can also repair Meatrol energy loggers and have stock of replacement parts.

AmpX Management

warranty 2 years

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

FAST, RELIABLE DELIVERY

We deliver nationwide using courier services.

SAFE AND SECURE PAYMENT

We accept multiple payment methods, EFT, Credit Card, or TradeSafe.

EXPERT ADVICE AND SUPPORT

We are available to help via live chat, email, phone, and video calls.