225+ Electricians, Engineers and Energy professionals
trust and use our products.
ATP01 – Output integrator – Three phase – 1A
75.00 $
Use Rogowski Coils as normal Current transformers with this Integrator. It amplifies the signal from the Rogowski coil to be the same as a 1 A current transformer (CT). The ATP01 is a DIN-RAIL mounted, 1A Output Rogowski coil integrator. It is powered directly from the mains power supply. The ATP01 can be combined with any model and size of MRC and NRC Range Rogowski coils. The ATP01 and Rogowski coil is a very flexible system, suitable for high power load analysis, impulsive current monitoring, DC ripple measurement, etc. Flexible Rogowski coils are a good solution for current measurement and can be used in a number of cases where traditional current transformers is not the adequate solution.
| Size | 1A, 5A |
|---|
Online sales are only available in Europe and Southern Africa.
To get a quote on shipping outside these regions, please contact us in the in form bellow.
Sold Out – Get notified when it is back in Stock.
Would you like to be notified when this item is back in stock? Then please complete the form below:
Features of the ATP01:
The ATP01 is a DIN-RAIL 1A Output Rogowski coil integrator. It is installed in a distribution box, in a plastic 1 module DIN-RAIL enclosure, and powered directly from the mains.
The ATP01 can be combined with any model and size of Y-FCT or FCT Rogowski coils. The available values are: 0-1A AC.
ATP01 and Rogowski coil is a very flexible system, suitable for high power load analysis, impulsive current monitoring, DC ripple measurement, etc.
Due to its specific features, the flexible Rogowski coil is an excellent solution for current measurement and can be used in a number of cases where the traditional current transducer is not an adequate solution.
What does the ATP01 integrator do?
Rogowski coil output is a weak voltage mV signal, the ATP01 can amplify and convert it to a standard signal which can be captured by multimeter and scope.
Rogowski coil output is proportional to the frequency of the measured current, the signal equalization ensures a linear response on a wide frequency range.
ATP01 allows the use of coils on different electrical network frequencies, keeping the same output level over the frequencies.
An integrator is essential to equalize and shift the output signal from the Rogowski coils by 90°.
It consists of an active electronic circuit with negligible offset and a good linearity.
Advantages:
- High read accuracy 0.5%
- Compact DIN-RAIL construction
- High bandwidth for measurement 30 to 5kHz
- Output 1A rms
Applications:
- Measuring devices, lab instrumentation
- Power monitoring & analysis
- Harmonics and transients monitoring
- Welding machine control
- High current measurement
Specifications of ATP01 integrator:
| Model | ATP01 |
| Rated output | 1A AC rms |
| Maximum Output(overload) | 1.5A AC rms |
| Rated ratio | 100A 600A 1000A 3000A 6000A |
| Read Accuracy | 0.5% typical at 1%(≥10A) to 110%of rated Current @25℃ |
| Phase error | ≤0.5° |
| Linearity | ±0.2% of reading(10% to 120% of range) |
| Bandwidth | 30Hz to 5kHz |
| Maximum Burden | 0.5Ω |
| Measurement | Secondary CTs to measure output of integrator |
| Power consumption | 5W |
| Output on 0A （zero drift） | ≤0.01A |
| Temperature drift | 200ppm/℃ |
| Weight | 320g |
| Dimension | 114*100*22.5mm |
| Power supply | 12V DC |
| Operating temperature | -20℃ to 70℃ |
| Storage temperature | -30℃ to 90℃ |
| Relative humidity | 80% max.without condensation |
| Protection degree | IP20 |
Product Downloads:
Warranty
These energy loggers has been field tested to be reliable and with a very low failure rate. If in the rare case something does go wrong, we will swop it out if still under guarantee. This energy logger has a two-year swop-out guarantee. As an authorised Meatrol repair centre, we can also repair Meatrol energy loggers and have stock of replacement parts.
AmpX Management
Technical support
If you have any difficulty with the meter setup, installation, data analysis, or anything else, we will gladly support you.
Please contact our technical support department for technical support on WhatsApp at +27 82 940 1858, or by email: info at AmpX.co
Why buy at AmpX
- Local warranty support, we have offices and ware houses in Germany and South Africa.
- Local parts and repairs
- Quick delivery, we only sell products that are in stock, once we received payment, goods are delivered withing one week.
- Specialist support, we specialise in energy logging and reporting, if you have any question we are willing and able to support you. If your need assistance with meter setup, installation, data download, or data analysis, we can support you.
- Peace of mind, you can return any product within 30 days, no questions asked.
- 2 year warranty, one additional year to the normal one year manufacturers warranty.
- We might not be the cheapest, but we provide additional value above and beyond just delivering a product.
Free Demonstration
We can offer you a free demonstration of our energy meters at our premises or within 100 km. If further away, we will need to charge for our travel expenses.
Alternatively we can also do an online video consultation and demonstration.
Click here to request a demonstration if 100 km from our address.
Click here to schedule an online video call and demonstration.
Request Quote
Related products
-
75.00 $ -
95.00 $ -
150.00 $ -
8.00 $
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet